need some 3100 parts

[3X00-Modified]

94-96 3100 fuel line assemblies, I need the rubber/steel line that goes from the body to the fuel rails.

Also I need the 3100 brake booster vac line

and a 94 3100 heater core pipe, the tower part that wraps around the front valve cover and goes to the heater core, Specifically I need the 94 one since it does not have the TB heater lines on it.

PM me if you have or can get any of this.

[scd88ga]

I don't have any of it, but I can get all of it. There is this car at the yard down the road, It's a 94, and there are at least 3-5 94-96 V6 base models there as well.

[3X00-Modified]

That would be great, just please double check those fuel lines to ensure that the rubber part is not cracked or in bad condition. Find the best set you can and if thats still not the greatest I'll replace the rubber with new stuff. I just need the routing correct since stuff is is really weird and hard spots to work with on this car when it doesn't need to be.

[scd88ga]

Will do! I doubt I will get out to the yard today, but I will try. I have a few things to finish up on Erin's car, and then she is picking it up around 2. So I might have time after that today, otherwise it will be tomorrow.

[3X00-Modified]

Thats fine, I wont be assembling those parts till maybe next week at the earliest if I have all the other parts necessary to do that.

Thanks and let me know what I owe you when your ready to ship.

[DTMAce]

While you are out there, see if you can pull me a bleeder for the stand pipe above the water pump on one of those. I need one please! I want the whole piece, the nut and the bleeder, its brass.

[3X00-Modified]

You can have the one off whatever he pulls for me, I already have one on the engine I'm starting with.

[Alpinestar10]

3x00 pm me how that part looks i have one off a grand am alero from a yard it mates to the stock lines all the way up to the fuel rail if you want text me or ill text you a pic

[3X00-Modified]

Brett, any update on these parts? Or anyone for that matter who may have them since I haven't heard from him since he replied to this.

Alpine, I want to stick to the stock lines for a 3100 on a Beretta, I like the way they go and they stay clear from the exhaust that way.

[3X00-Modified]

No dice huh....

I guess I'll source these parts elsewhere; I can't be waiting for a simple update like this when I'm trying to complete a car for another member.

[Alpinestar10]

im going to get a bumper cover from the yard for gehoff ill grab you one of these while im out there they should have alot of berettas

[heavywoody]

I'll see about going to the yard this weekend and get what you need Jon.

[3X00-Modified]

im going to get a bumper cover from the yard for gehoff ill grab you one of these while im out there they should have alot of berettas

Thank you Apline, I'm really interested in the fuel lines more than the heater core pipe since I do have one of those I could use but I wasn't going to if I could find another. I need the whole quick disconnect all the way to the rail.

I really do wish I had a yard near me with Beretta's in it.

thx Geoff!

[Alpinestar10]

Hey i was able to get the fuel line and brake booster vac hose

[3X00-Modified]

Line or lines? I need both. Let me know the cost