Black gtz / pvc intake guy
- 90BerettaGTZ
- Registered User
- Posts: 33
- Joined: Thu May 31, 2001 4:36 pm
- Location: Planet Earth
Black gtz / pvc intake guy
hey =)
guy with the GTZ and pvc intake setup. could i have a parts list and or pictures please? many thanks.
guy with the GTZ and pvc intake setup. could i have a parts list and or pictures please? many thanks.
- 90BerettaGTZ
- Registered User
- Posts: 33
- Joined: Thu May 31, 2001 4:36 pm
- Location: Planet Earth
Black gtz / pvc intake guy
Quote (90BerettaGTZ @ Mar. 10 2002,6:11)ericm555
Ya thats me.
Heres a pic.
Its just a piece of 3" PVC 45 degree elbow with a short piece of 3" strait pipe that hooks to the filter. I used a rubber clamp thingy I cant think of the name. They fit over the PVC and clamp down. I got one of those cheep $20 filters from autozone and pulled the small rubber thing out of it and put a big one in there so it will clamp onto the 3" PVC. I also used a piece of 3/4" tube and taped the PVC to run the oil/air seperator but most people just use a breather filter. Hope this helps.
Ya thats me.
Heres a pic.
Its just a piece of 3" PVC 45 degree elbow with a short piece of 3" strait pipe that hooks to the filter. I used a rubber clamp thingy I cant think of the name. They fit over the PVC and clamp down. I got one of those cheep $20 filters from autozone and pulled the small rubber thing out of it and put a big one in there so it will clamp onto the 3" PVC. I also used a piece of 3/4" tube and taped the PVC to run the oil/air seperator but most people just use a breather filter. Hope this helps.
Black gtz / pvc intake guy
think twice about that pvc intake tubing. the c in pvc if for chloride, or chlorine. as i am sure you are aware, a very poisonous gas. and pvc can give off that gas when it gets hot, as it will in your hood. you should be able to find all the parts that were pvc in black rubber.
ROb
ROb
- 90BerettaGTZ
- Registered User
- Posts: 33
- Joined: Thu May 31, 2001 4:36 pm
- Location: Planet Earth
Black gtz / pvc intake guy
thanks Rob, but im not entirely sure that its going to get that hot in that location. hot water pipes in mobile homes are pvc and in jacuzzis. i realize that underhood gets hot, but theres no direct heat being applied to the pvc other than the ambient stuff.
pvc is alot thicker than the rubber stuff, therefor making for a better insulator. admittedly over a longer period of time rubber would be better because it would cool faster [ maybe maybe not but it sounds good ].
if the rubber stuff is smooth inside with no kinks or convoluted edges then ill use that instead. the price has to be right as well.
thanks for the picture, that helped out alot. time for me to hit home depot.
pvc is alot thicker than the rubber stuff, therefor making for a better insulator. admittedly over a longer period of time rubber would be better because it would cool faster [ maybe maybe not but it sounds good ].
if the rubber stuff is smooth inside with no kinks or convoluted edges then ill use that instead. the price has to be right as well.
thanks for the picture, that helped out alot. time for me to hit home depot.
- 90BerettaGTZ
- Registered User
- Posts: 33
- Joined: Thu May 31, 2001 4:36 pm
- Location: Planet Earth
Black gtz / pvc intake guy
while i have you attention Eric, how are the kdw tires in the handling department? sidewalls stiffer than the "norm"?
Black gtz / pvc intake guy
Quote (90BerettaGTZ @ Mar. 11 2002,5:29)while i have you attention Eric, how are the kdw tires in the handling department? sidewalls stiffer than the "norm"?
They are much stiffer than anything I have seen before. They dont seem to flex at all. I used to have Comp TA VR4s and these are so much stiffer. They get really good dry and wet traction but do not try and drive them in the snow.
They are much stiffer than anything I have seen before. They dont seem to flex at all. I used to have Comp TA VR4s and these are so much stiffer. They get really good dry and wet traction but do not try and drive them in the snow.
- 90BerettaGTZ
- Registered User
- Posts: 33
- Joined: Thu May 31, 2001 4:36 pm
- Location: Planet Earth
Black gtz / pvc intake guy
hehe snow is not much of an issue in Florida.
i may go with the yoko avs inter. tire for pricing plus ive heard alot of good things over the years. *shrug* thanks again for the input. itll be put to good use.
i may go with the yoko avs inter. tire for pricing plus ive heard alot of good things over the years. *shrug* thanks again for the input. itll be put to good use.
Black gtz / pvc intake guy
I have PVC rubber 3in pipes & I haven't emitted any poisonous gases...if you're scared about the plastic ones melting away, use rubber PVC.
Black gtz / pvc intake guy
The only thing that would melt it would be the exhaust manafold. That would be hard for it to get on since its on the back of the engine.