Beretta.net

Anyone have a clue, if somebody produced polyurethane rear axle bushings?

no their is just 3 types of replacements their was talks of delrin ones being made but they fell through if im not mistaken

Most likely my car is the only Beretta on the planet with Delrin bushings still

We had one guy in Estonia, who did custom polyurethane bushings, but now he has moved somewhere else.
Measured the rear axle and will send energy e-mail that do they have any universal ones on that size.

if they do please post up and i also hit erichz26 old thread to see what he says bout making more of the bushings that weba has

I think I found a poly bushings for rear axle. These are universal bushes from Energy and in first it looks like it suits with the dimensions of rear axle tubing.

http://www.energysuspensionparts.com/pr ... rod=9.9488#

Dimensions can be found here

http://www.energysuspensionparts.com/En ... shings.asp

I measured the rear axle tubing for inner diameter - 1.73" and for length 2.55". Looks like we have a winner. Only I have not measured the bolt diameter. Will do this in evening.

keep us updated on this one.

If you take a look at the stock bushings, you can see they only have flange on other side, making that fit inside the mount in the frame may need some lathe time.

Also, I measured the bolt yesterday. Stock is 12mm, but these bushes need 16mm.

Anyone have a picture and dimensions of stock bushing?

Just order a replacement one from rockauto, and take it to your machinist to multiply.

Fu*k

https://www.youtube.com/watch?v=8-iYPU-e_lA

Any damage?

Nope, just stuck on the belly. Got pulled out by quattro.

Man you are lucky. Parts have to be hard to get there(take it easy).