WTB Rear solid external sway bar

[Amateur]

went to the junkyard today to find one, came back empty handed.
Looking for a reasonably priced rear sway bar with all hardware. keep me posted peeps if anyone has one.

[Amateur]

Just wondering, can i pull a external sway bar off of a '91 cavalier z24 and put in on? looks like it might work out but I need to know 100%. If its a no go, are there any other cars that would work besides the obvious beretta models and addco (trying to do it on a budget).

[speedy]

what year can they come from? i found a 88 in the yard today with a bar but i cant tell if its hallow or solid, i also found a w26 in the yard today.

[Styluss]

They are not on the '88s. And the easiest way to tell is to feel the end of the bar. If there is a hole, it's not the solid bar!
And as for your inquiry as to whether nor not a bar from a Cavi will fit, to the best of my knowledge no. And I even have a Cavi with the solid bar at home. I guess I could look. But I'm pretty sure the mounts won't work. Other cars with a bar that will work? There are none. You have to find one from a Beretta. I can speak for the Addco bar and it is AWESOME. I ran the Z51 bar and now I have an Addco and the Addco is MUCH better. Worth the money, but then again I did get mine cheaper as it was used.

I have a solid rear sway in my garage, but it is waiting for me to buy another Beretta... which may never happen.

[3X00-Modified]

I have one, but I'm missing the outer mounts... and the inners are chopped for the internal bar to be there.

[Amateur]

......Addco bar and it is AWESOME. I ran the Z51 bar and now I have an Addco and the Addco is MUCH better.....

Well I guess that settles it, I'll save up for the addco! [can't beat testimony like that]
My car doesn't have the speed, so handling is where I'm putting my money on and it's as good as you say it is, why not.

[Styluss]

3X00, even with the notches for the internal bar the mounts will still function just fine without the internal bar there. And I concur Amateur, buy the cool kid bar.

[felixGTU]

How rare are the rear swaybars for the Beretta's. I saw one in the yard today but did not bother taking it because I already have one. That way if they are hard to come by I will go get it.

[Styluss]

Not too rare. But make sure you're pulling the solid bar, not the hollow one. No one wants the hollow one.
I used to pull these any time I saw one, but the shipping got to be a hassle as they are so awkwardly shaped and no one wants to pay for the process.

[#1 stunna]

I think they are pretty rare , around here anyways . The Z51 option was only avaiable on the 88 gt ... right?

[Styluss]

Amateur... I'll be going yarding hopefully this weekend. If not this one, the next. If I see one I'll pull it for you, brackets and all.

[BRich Beretta]

I have one for sale too.

[3X00-Modified]

I now have the whole setup if anyone is interested... All stock parts. I can also include the internal plastic brackets that are cut away to accommodate an internal bar with it.

[ErichZ26]

If you are trying to get them from yards anywhere around Aurora Illinois. Good luck. As a matter of fact i pulled one the same week you originally posted this topic.

I scored 2 of them in past year. One of the cars came into yard on flatbed rusted out. I happend to be there on its way to crusher...I pulled it. This same yard had a 1995 58k mile Beretta base nice interior.

[Styluss]

The bars aren't that rare and I would advise against pulling something like this unless you are willing to wait for an interested buyer and then deal with the oddly shaped shipping needs.