Motor is shot!
- Beretta Z26
- Registered User
- Posts: 36
- Joined: Fri Apr 25, 2008 2:04 pm
- Location: Arkansas
Motor is shot!
Hey everybody got a problem here. My 3100 motor decided it wanted to drop a valve in the #4 cylinder, The motor has 160,000+ miles on it and was wondering what a good motor to replace it would be. I'm on a tight budget right now so she'll have to sit until i get me another job.
Just lemme know what other motors i can put in my baby to get her back on the road.
Thanx, Mr.Jeff
Just lemme know what other motors i can put in my baby to get her back on the road.
Thanx, Mr.Jeff
MR. JEFF
-
- Registered User
- Posts: 290
- Joined: Sat May 05, 2001 4:48 pm
- Location: Calgary, Alberta
- Contact:
Motor is shot!
3400
Motor is shot!
3500
-
- Registered User
- Posts: 1261
- Joined: Sun Mar 12, 2006 12:11 am
- Location: Rochester New York
- Contact:
Motor is shot!
both should be a direct swap but the 3400 would be the easier one for u to swap w/o havin to worry bout much of anything as 3500 needs lil more tuning to run decent
93 GT cammed 3500 TORSEN, headers,intake,wilwood,poly/delrin mounts, 2.5 S.S,Exhaust,dickman kits,GTUspoiler,Euro headlights-tails-mirrors-fender flares-spoiler,Intrax/Koni,91+blk interior,rr disk swap,s.s.clutch line
- 3X00-Modified
- Administrator
- Posts: 10915
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Motor is shot!
3500 needs tuning, needs more external bolt on parts to drop in and needs bracket fabrication for any transmission that you end up using.
3400 bolts right in with all the 3100 accessories...
Pick your poison.
Sorry 3500 guys, but the 3400 will still and ALWAYS be the direct swap alternative for a 3100... If you are going performance then yes maybe the 3500 fits the bill but right now its about $300+ in external bolt on parts and modifications to make it fit and work at all... nevermind tuning afterwards.
External crank trigger, TB adapter, larger TB since a 3100 one on a 3500 is just stupid, larger fuel injectors since 3100 ones will not support a 3500, and 3500 injectors cant be used, and  custom vac lines are needed and so on... I'm sure I'm missing something.
3400 bolts right in with all the 3100 accessories...
Pick your poison.
Sorry 3500 guys, but the 3400 will still and ALWAYS be the direct swap alternative for a 3100... If you are going performance then yes maybe the 3500 fits the bill but right now its about $300+ in external bolt on parts and modifications to make it fit and work at all... nevermind tuning afterwards.
External crank trigger, TB adapter, larger TB since a 3100 one on a 3500 is just stupid, larger fuel injectors since 3100 ones will not support a 3500, and 3500 injectors cant be used, and  custom vac lines are needed and so on... I'm sure I'm missing something.
- Beretta Z26
- Registered User
- Posts: 36
- Joined: Fri Apr 25, 2008 2:04 pm
- Location: Arkansas
Motor is shot!
Ok thanx for all ur help guys. Guess i'll go junkyard shopping for a 3400
Thanx a bunch
Mr. Jeff
Thanx a bunch
Mr. Jeff
MR. JEFF
Motor is shot!
do a hybrid (3400 with 3500 Intake and heads); best of both worlds! at my local junkyard you can get the engine out and replace junk heads and intake with goodies for nothing extra, look for someplace like that, a self serve place. or do what im doing, 2800!
1988 Beretta GT 5 speed - 1st car... Gone to the crusher.
1989 Beretta GT Z-51
1994 Beretta Z26 getting FE7+Z51 goodies
1987 Pontiac Bonneville LG3+4T65-E
1987 Chevrolet Celebrity Wagon L36+4T65-E
1998 Chevrolet C1500 5.7L L31+ built 4L60-E

1989 Beretta GT Z-51
1994 Beretta Z26 getting FE7+Z51 goodies
1987 Pontiac Bonneville LG3+4T65-E
1987 Chevrolet Celebrity Wagon L36+4T65-E
1998 Chevrolet C1500 5.7L L31+ built 4L60-E
- Beretta Z26
- Registered User
- Posts: 36
- Joined: Fri Apr 25, 2008 2:04 pm
- Location: Arkansas
Motor is shot!
So for this 3400/3500 hybrid, will everything like my acc. and everything still bolt up? Am i going to need new injectors or do any comp. tuning to make it run right?
MR. JEFF
-
- Registered User
- Posts: 1035
- Joined: Thu Feb 20, 2003 11:21 pm
- Location: South Central MN
Motor is shot!
you need a TB adapter.
94 Beretta Z26 57,4xx miles
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler

Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
- Beretta Z26
- Registered User
- Posts: 36
- Joined: Fri Apr 25, 2008 2:04 pm
- Location: Arkansas
-
- Registered User
- Posts: 1035
- Joined: Thu Feb 20, 2003 11:21 pm
- Location: South Central MN
Motor is shot!
look for them, I think 60 degree has em.
94 Beretta Z26 57,4xx miles
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler

Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo